Regular Type Plastisol Ink for Fabric (Cut Pieces, Garment)
 U5 & U2 Color Series
Appearence : various color emulsions (at room temperature.)
Characteristic : Glossy, excellent adhesion, low-temperature curing, easy printability and non-sticky print surface.
Application : Suitable for 100% cotton cut fabric or garment (substrate needs to be resistant to curing temperature of more than 130?~ 150?)
Using method :
Mesh Count : 120 ~ 300 mesh
Ink Matching : Use alone or combine with clear or white base
Modifying Viscosity : Use reducer or thickener to adjust the desired viscosity but add not more than 15%
Curing Temperature : 130? ~ 150 ?(75KW infrared curing equipment)
Curing Time : Generally print twice, cure for 2-3 minutes, but extend the curing time depending on plate thickness.
Wash-up : Soap & water or solvent (such as water based screen cleaner)
Printing Characteristic :
 
Testing Item Color Brightness Elasticity Softness Wash resistance Wet Rub Test Dry Rub Test Anti-stick Property
Result Transparent 75-90 degree 70-80 % 5 5 4-5 4-5 5
Remarks :
 
1. When printing overlapping colors, be sure to dry or flash cure each layer until the surface is non-sticky then proceed printing the next layer.
2. Plastisol Ink depends on temperature to dry so it is strictly necessary to control curing. Under or over curing will affect above characteristic.
3. U2 series are suitable for light colored fabrics.
4. Use U5 series when printing on dark fabrics for better coverage.
Pics :  
 
 


Copyright ® 1999-2006 Unicorn All rights reserved.
TEL:+886-2-2570-3389 / FAX:+886-2-2570-3380 eMail:sky.polo@msa.hinet.net ; sales@plastisolink.com

ALL CHARACTERS USED IN THIS SITE ARE PROVIDED SOLELY FOR DISPLAY PURPOSES ONLY. ALL CREATIVE RIGHTS TO THE CHARACTERS BELONG TO THEIR CREATORS. ALL BRANDS, LOGOS AND TRADEMARKS BELONG TO THEIR RESPECTIVE COMPANIES.