Regular Type Plastisol Ink for Fabric (Cut Pieces, Garment)
 High Gloss Gel
Appearence : clear emulsion (at room temperature)
Characteristic : High gloss, excellent adhesion, low-temperature curing, easy printability and non-sticky print surface.
Application : Suitable for 100% cotton cut fabric or garment (substrate needs to be resistant to curing temperature of more than 130?XC)
Using method :
Mesh Count : 80 ~ 150 mesh
Ink Matching : Use alone or as a final coat to give high transparency and gloss to printed design.
Modifying Viscosity :
Curing Temperature : 130?XC ~ 150?XC(75KW infrared curing equipment)
Curing Time : Generally print twice, cure for 2-3 minutes, but extend the curing time depending on plate thickness.
Wash-up : Soap & water or solvent (such as water based screen cleaner)
Printing Characteristic :
 
Testing Item Color Brightness Elasticity Softness Wash resistance Wet Rub Test Dry Rub Test Anti-stick Property
Result Transparent 85-90 degree 70-80 % 5 5 5 5 5
Remarks :
 
1. Material may tend to stiffen when not used. Stir and blend thoroughly before each use.
2. When printing overlapping colors, be sure to dry or flash cure each layer until the surface is non-sticky then proceed printing the next layer.
3. If sticky print surface occurs, use an anti-tack agent to reduce stickiness.
4. Plastisol Ink depends on temperature to dry so it is strictly necessary to control curing. Under or over curing will affect above characteristic.
Pics :  
 
 


Copyright ® 1999-2006 Unicorn All rights reserved.
TEL:+886-2-2570-3389 / FAX:+886-2-2570-3380 eMail:sky.polo@msa.hinet.net ; sales@plastisolink.com

ALL CHARACTERS USED IN THIS SITE ARE PROVIDED SOLELY FOR DISPLAY PURPOSES ONLY. ALL CREATIVE RIGHTS TO THE CHARACTERS BELONG TO THEIR CREATORS. ALL BRANDS, LOGOS AND TRADEMARKS BELONG TO THEIR RESPECTIVE COMPANIES.