Plastisol Additives
Item Description Characteristic Recommendation Precaution Packing
Reducer Normal Reducer Add in plastisol to reduce viscosity /20kg Black PE Drum
/50kg Blue PE Drum
Reducer-R Regular Resin-
type Reducer
Add in plastisol to reduce viscosity, depending on the requirement. /20kg Black PE Drum
/50kg Blue PE Drum
ECO Reducer ECO Reducer Add in plastisol to reduce viscosity /20kg Black PE Drum
/50kg Blue PE Drum
ECO Reducer-R ECO Resin-type
Reducer
Add in plastisol to reduce viscosity, depending on the requirement. /20kg Black PE Drum
/50kg Blue PE Drum
U-0070 Low-temperature
Reducer
Add in plastisol to reduce viscosity and also lower the curing temp. /20kg Black PE Drum
/50kg Blue PE Drum
U-0174AR Low-temperature
Resin-type
Reducer
Add in plastisol to reduce viscosity and lower the curing temp, depending on the requirement. /20kg Black PE Drum
/50kg Blue PE Drum
U-0850 Softening oil To improve soft-feel of prints /20kg Black PE Drum
/50kg Blue PE Drum
U-0060 Normal Thickener To increase viscosity /20kg Black PE Drum
/50kg Blue PE Drum
U-0060-1 ECO Thickener To increase viscosity and reduce tack while printing /20kg Black PE Drum
/50kg Blue PE Drum
ECO Thickener ECO Thickener To increase viscosity /20kg Black PE Drum
/50kg Blue PE Drum
UBR-5220 Thickener Powder Thickener in Powder form, to increase viscosity and improve transparency. 10kg/Paper packing
UBR-5295C Thickener Powder •excellent thickener with high transparency.
•adding at a certain quantity will give good matt effect.
10kg/Paper packing
U-03 Cross-Linking improves adhesion of plastisol Add 3-10% /20kg Black PE Drum
/50kg Blue PE Drum
U-0950 Print Hardener To harden the print Mix with plastisol at 1:1 ratio May cause cracking /20kg Black PE Drum
/50kg Blue PE Drum
Clear Gel High Gloss Clear
Gel
•glossy, crystal clear, jelly like prints
•Excellent wet-look effect
Excellent as overprint for colors Mix thoroughly before use /20kg Black PE Drum
/50kg Blue PE Drum
Heat-Transfer
Plasti
Heat-Transfer
Plastisol
•use as foil, flock or heat transfer adhesive
•good fastness
Use alone /20kg Black PE Drum
/50kg Blue PE Drum
U-5080 Solvent-type Heat
Transfer Paste
•for flock transfer
•good wash fastness
•soft-feel
•use alone
•use methyl benzene to adjust viscosity if needed
/20kg Black PE Drum
/50kg Blue PE Drum
UEP-7040 ECO Low-
Temperature
Transfer Printing
Paste
•use as foil, flock or heat transfer adhesive
•good wash fastness
•Mix up A and B (A:B=7:4) before use
• curing temp. at 110-130?XC
• transfer temp. at 120-180?XC
/20kg Black PE Drum
/50kg Blue PE Drum
UBH-008 Hot Melt Powder •fine powder with low hot melt temp.
•good adhesion
Add in plastisol to improve wash fastness. 25kg/Paper packing
Regular White M Glossy White ‧glossy
‧low temperature curing
‧soft feel
‧high transparency
‧easy to use
    /20kg Black PE Drum
/50kg Blue Drum
 


Copyright ® 1999-2006 Unicorn All rights reserved.
TEL:+886-2-2570-3389 / FAX:+886-2-2570-3380 eMail:sky.polo@msa.hinet.net ; sales@plastisolink.com

ALL CHARACTERS USED IN THIS SITE ARE PROVIDED SOLELY FOR DISPLAY PURPOSES ONLY. ALL CREATIVE RIGHTS TO THE CHARACTERS BELONG TO THEIR CREATORS. ALL BRANDS, LOGOS AND TRADEMARKS BELONG TO THEIR RESPECTIVE COMPANIES.